Equipment Listing

To include: MIC Trimmer Line:  16' trim saw, with 0 saw, will pass a 20' board, includes infeed singulator transfer, Softac scanners and software, evenender rolls, movable fence, push button console, all controls in control office, 30'x30" waste conveyor under trimmer, (2) hyd. packs on ground under trimmer, trimmer controls attached, supports to the floor, conveyor & transfer, no motor controls. New stack cylinder in box. MIC 10' Tall 4 Dual Chain Bar Type Haul Up Unscrambler: MIC 10' Tall 4 Dual Chain Bar Type Haul Up Unscrambler  

4x4 John Deere 5065E tractor with front loader. Located Valdosta, GA 31601. Call Ethan for details: 931-607-4738 $32,500

Hour meter shows 6431Hrs. 3phase main power. 120v Motor Controllers. 15HP 3phase Hydraulic unit. Set up for 1 1/2" bands. Self-tensioning blade system uses air power for blade tension. Comes with operators cab. Cab has heat and air. Joystick controls and computer set works. Comes w/ approx. 30 new Wood-Mizer 739 blades. Ready to work. Needs nothing. Will be removed and ready to set on your trailer. Located in Salem, IN. For further details, please contact Tyler Pence (270)766-4184. $55,000

20HP 3 Phase 12" x 17' infeed belt w/ 12" x 17' return belt. Set up for 2 inch bands. Comes with Hydraulic unit. Was used for staves but can remove diverters and used for lumber again. Located in New Haven, KY 40051. Contact Tyler Pence for further details (270)766-4184 $9,000

15" 3 Strand log infeed deck with stop and load. Bar chain log turner. 56" circle saw on husk frame. 150 HP electric motor. On board hydraulic power pack. 20' outfeed belt conveyor. Located at 120 Commercial Dr., Edmonton, KY 42129. Call Tyler Pence for more information: 270-766-4184 $50,000

With cyclone. With 100ft of dust pipe. No motor. Located at 120 Commercial Dr., Edmonton, KY 42129. Call Tyler Pence for more information: 270-766-4184 $5,500

Model 36D-1433A-91. movable saws. 4" edger. Located at 120 Commercial Dr., Edmonton, KY 42129. Call Tyler Pence for more information: 270-766-4184 $8,500

2588 hours. SN NDDC70001. 10' long tracks. 6 way blade. Heat/AC. Cab. Wide track. Located in Valdosta, GA contact Ethan for more info 931-607-4738. $88,000

195 hours. 67x34R25 tires. 22" cut. 5702 Fellerbuncher head. SN7266562. Machine still under factory warranty. Located at 540 Hillside Ln., Vienna, IL 62995. Contact Ethan Mealer for more info. 931-607-4738 $385,000

Dual function boom. Paccar winch. SN N194609301. SN 6309987. 797 hours. 35.5L-32 tires. Machine still under factory warranty. Located at 540 Hillside Ln., Vienna, IL 62995. Contact Ethan Mealer for more info. 931-607-4738 $420,000

SN 12159526344. Barko grapple. 3040 hours. 264 Ultra delimber and buck. Includes CSI4400 buck saw. Located at 540 Hillside Ln., Vienna, IL 62995. Contact Ethan Mealer for more info. 931-607-4738 $245,000

60" wide. 536hp CAT engine. 24" capacity. 200 gallon fuel capacity. 120 gallon hydraulic capacity. Total weight is 48,000lbs. Length is 47.5" Machine is still under warranty with 1800 hours. Located in Moultrie, GA. Contact Ethan for more info 931-607-4738 $330,000

Peterson grinder part out. Located in Moultrie, GA Contact Ethan for more info 931-607-4738. $3,300

SOLD!! 100hp 3ph motor with shaker table. Located in Big Clifty, KY. Contact Tyler for more info 270-766-4184 $27,500

Shop built. No motor. Located at 120 Commercial Dr., Edmonton, KY 42129. Call Tyler Pence for more information: 270-766-4184 $11,000

12in x 12in throat capacity. 16ft max cut length. Full run around system. 25HP 3 Phase motor. Self contained Hydraulic pump and tank. Set up for 1 1/2” bands. Pre-programable digital set works. 12volt set works. Ready to work. Will be removed and ready to set in your trailer. Located in Salem, IN. For further details, contact Tyler Pence (270)766-4184 $13,200

(SN: CAT00D3KVE207173) with mulcher head from factory, showing 2264 hours at time of inspection, Ready to work, Counter weights, Roughly 31,000 lbs. Located at 10750 S. Preston Hwy, Lebanon Junction, KY 40150. For more information contact: Tyler Pence at 270-766-4184 $145,000

Dual Arch Grapple Skidder. Hours unknown. Grapple does not spin but everything else works. Two small hydraulic leaks. Starts, Runs, and ready to work. Tires approx 25% Located in Salem, IN. For further details, contact Tyler Pence (270)766-4184 $28,500

15HP 3 Phase rotary screw compressor. Freshly rebuilt. Shows 13125 hours. 120 gallon tank. No leaks. 51.7 CFM. Located in Big Clifty, KY 42712. Contact Tyler Pence for further details (270)766-4184 $2,500

Good compressor. Tank is good, no leaks. Has a good 7 HP 3 Phase motor, but is too small. Needs at least 10HP motor. Located in New Haven, KY 40051. Contact Tyler Pence for further details (270)766-4184 $600

25HP 3phase motor. Accuset Controls. Shows 6455 hours. Comes w/ axle and tires. Cable track needs repair. Located in New Haven, KY 40051. Contact Tyler Pence for further details (270)766-4184 $19,000

Includes 8' 4 strand infeed deck, hydraulic power pack, and 6' 6 strand outfeed deck. Located at 3471 Brown Road, Valdosta, GA 31601. Call Ethan for details: 931-607-4738 $38,500

SN: 202, 50 HP motor, self contained hydraulic system. 10 HP hydraulic pack. Located at 3471 Brown Road, Valdosta, GA 31601.  8% sales tax applies. Call Ethan for details: 931-607-4738 $11,000

Located at 3471 Brown Road, Valdosta, GA 31601. Call Ethan for details: 931-607-4738 $45,000

Model: B. Overhauled. Refurbished. Comes with power troll that is listed in the pictures. Engine: 2.4L to 2.9L two-cylinder, liquid-cooled, all-fuel. Horsepower: 12-16 HP at drawbar, 16-19 HP at the belt. Transmission: 4-speed unsynchronized gear (4 forward, 1 reverse). Weight: 2,898 to 3,800 lbs. Fuel Capacity: 12 gallons. Located in Pulaski, TN 38478 Contact Joseph for more info 931-446-0772 $2,500

Starts, Runs, Welds, and Generates. Hour meter shows 108hrs. Kohler engine. 35amp. 10,000 watts. Will not auto idle down, but runs fine at low idle position and high idle position. Comes with extra long leads, approximately 20ft. Located in Mt. Sherman, KY Contact Tyler Pence for further details 270-766-4184 

SOLD!!  Barko 160A W/ CTR Ground Saw. Lever controls. Starts Easy and Runs Strong. 4cyl John Deere Turbo engine. Hour meter shows 803 hrs. Professionally line bored and re-pinned main boom bushing and stick boom bushing. Very dry machine. Window unit and inverter for A/C. Comes with replacements for all cylinders, swing motors, and main pump. Comes with extra grapple. All 8 tires are in good shape on Pitts Trailer. On the job working now. Located in Mt Sherman, KY. For further details, contact Tyler Pence (270)766-4184 $22,000

LOG INFEED: Hourglass Roll case, 18' long x 22" rolls 66" OAL 8" OD on end 5" OD in middle. Stop and load with 3 kickers. MORBARK DEBARKER: (E48SCS) stamped on frame. BARN SWEEP UNDER DEBARKER: 30' flat x 48" wide 14" paddles, 24' incline section x 40" wide. Located in Warrensburg, NY. Contact Ethan for more details 931-607-4738. $15,000

LOG INFEED DECK TO CARRIAGE: 3 strand 10' wide x 22' long, Stop and load with 3 kickers. Electrical on infeed wall. Barn sweep under saw. Laser lights. Forrest-All Modular Mill with 54" saw, chain turner, 2 saw vertical edger, (2) spare saws, 4 HB carriage 14' long, knee spacing is 54" - 39" - 39" , Track 46' long 45" track spacing, Off-bearer belt 16' x 18' Track 46' long, 45" track width, 44' flat x 48" wide 10' incline 15" paddles, Computer Setworks for carriage and Vertical Edger. Spare saws (1) 54", (3) 48", (4) 50"   Located in Warrensburg, NY. Contact Ethan for more info 931-607-4738  $30,000

SPIRAL ROLLCASE: 18' x 24' with 7" rolls LANDING TABLE: 14' x 4' with 5 dead rolls HILLTOP TRIMSAW: Two saw with 20" saws Located in Warrensburg, NY. Contact Ethan for more info 931-607-4738 $8,000

4-strand 40' long x 12' wide, 48' - 42" - 48" , (11'8" OAL) Located in Warrensburg, NY. Contact Ethan for more info 931-607-4738 $5,000

BELT CONVEYOR TO CHIPPER: 20' x 18", 5 Dead Rolls for cant transfer to slides (above belt conveyor) MORBARK CHIPPER WITH CHIP PAC: 3 Knife, 3ph/75HP motor, with dual chip loader  CHIP BLOWER: Approximately 20' of 8" pipe FINES BLOWER: Approximately 10'' of 6" pipe Located in Warrensburg, NY. Contact Ethan for more info 931-607-4738  $30,000

Ready to work. Has 15,196 hours. Located at 80 Proctor Road, Henderson, TN 38340. Contact Ethan for more details 931-607-4738

Year: 2009. Make: Ponsse. Model: Buffalo. 8WD forwarder.15 ton knuckle boom. Mercedes-Benz Diesel engine. 20,503hrs. K90M+ boom. With tracks and track components. Located at Francis Creek, WI. Call Zach for more info: 931-224-0699 

PIN: L70EV60079. 44,550 hours. New motor 25K in 2018. Trans rebuilt = around approx. 20K hours. Engine: Volvo D6D LB E2. Year: 2004. Make: Volvo. Model: L70E. Fuel: Diesel. Lift Capacity: approx 18,000Lbs. 3rd Function: Yes. Quick Connect: Yes. Tire Size: 20.5R25. Located in Francis Creek, WI. Contact Zach for more info: 931-224-0699

Debarker  Morbark 636 Debarker (sn: 468) with controls and bult in hydraulic pack and 3x5' cab.  Detroit 371 Diesel Power Unit w/ WPT power output shaft, no hour meter.  2 Strand 15' Infeed Log Deck w/ six chain hydraulic servo and 2 arm log loader.  18' Debarker Infeed Log Trough with 12" chain 14" bottom 40" wide hydraulic drive.  18' Debarker Outfeed Log Trough with 3 arm kickers. Cornell 50' Barnsweep Conveyor 18" flights 42" wide 5HP electric motor.  Contact Joseph Whitaker 931-446-0772 or Ethan Mealer 931-607-4738 for more information.

Engine: 4-cylinder. Transmission: 4-speed standard. PTO: Fully live PTO. Hitch: Snap-Coupler. Located in Pulaski, TN 38478. Contact Joseph for more info 931-446-0772

Model A. Engine Stuck. Missing radiator cap. Comes with SA sickle mower. Located in Pulaski, TN 38478 Contact Joseph for more info 931-446-0772

Engine is stuck. Engine: 2-cylinder, 501 cubic-inch. Horsepower: 30 HP. Transmission: 2-speed gear drive. Weight: Approximately 5,000 lbs. Located in Pulaski, TN 38478. Contact Joseph for more info 931-446-0772

Snap coupler hitch. Comes with attachment for 3 point. Engine: Allis-Chalmers Power-Crater 4-cylinder Horsepower: 35hp Transmission: 4-speed sliding gear with a high/low transfer case Located in Pulaski, TN 38478. Contact Joseph for more info 931-446-0772

Model: RT5200H Serial Number: 293493 Like new condition. Located in Pulaski, TN 38478. Contact Joseph for more info 931-446-0772

Located in Pulaski, TN 38478. Contact Joseph for more info 931-446-0772

Located in Pulaski, TN 38478. Contact Joseph for more info 931-446-0772

Located in Pulaski, TN 38478. Contact Joseph for more info 931-446-0772

Located in Pulaski, TN 38478. Contact Joseph for more info 931-446-0772

24ft gooseneck flatbed trailer. Good condition with a dove tail. Located in Pulaski, TN. Contact Joseph for more info 931-446-0772.

1996 Mack CH613. Live duals on air ride suspension. Locking rear differentials make an excellent log truck. 25ft flatbed. 18ft from back of cab to back of duals. All 8 drive tires are like new. Floats on front are like new. Clean inside and out. Only 262,000 original miles. Ready to go to work $25,000 located in Columbia, KY Contact Tyler Pence (270)766-4184 to schedule viewings  

2023 Tigercat 720G Feller Buncher equipped with Tigercat 5600 Saw Head – 6,407 Hours Very nice, well-maintained machine that is currently operating daily. Powered by an FPT N67 Tier 4 Final diesel engine and equipped with an enclosed ROPS cab, heat, A/C, and fire suppression system. Seller reports the machine has been serviced every 250 hours since new and is in excellent operating condition with no known mechanical issues. New hydrostats were installed by Tidewater under warranty, and the front pins and bushings have recently been replaced. Machine has been used exclusively in pine plantations. EQUIPMENT SPECIFICATIONS: Year: 2023 Make: Tigercat Model: 720G Serial Number: 7207596 Hours: 6,407 Engine: FPT N67 Tier 4 Final Diesel Feller Head: Tigercat 5600 Saw Disc Diameter: 57" Tire Size: 30.5 Cab/ROPS: Yes Heat & A/C: Yes Fire Suppression: Yes MAINTENANCE & CONDITION HIGHLIGHTS: Serviced every 250 hours since new New hydrostats installed under warranty Recently replaced front pins and bushings Used exclusively in pine plantations Currently working daily Seller reports no known mechanical issues LOCATION: Live Oak, FL 32060